Cone Crusher HP800 Adjustment Ring
Manufacturer : MORETEC
Part number :
OEM Compatibility :
Description
Description
Cone crusher adjusting ring
1) The adjusting ring components include hopper, threaded ring and fixed cone lining plate. Its installation quality can also affect the stability of equipment operation, crushing effect and service life of fixed cone lining plate.
2) The fixed cone liner and the threaded ring contact through the conical surface. During installation, place the normal cone liner, place the threaded ring on it, place the flange on the threaded ring, and clamp the snap ring to the outer ring of the neck of the fixed cone liner. Then tighten the bolts successively, repeatedly and symmetrically, and jack up the flange and clamp the snap ring.
3) After the fixed cone liner is installed, the pressure iron, sealing ring and hopper can be installed.
Solution of 2. Cone Break Adjustment Ring Looseness
1. Repair or replace the thread
When the adjustment sleeve, the support sleeve and the thread of the adjustment sleeve are worn and the adjustment ring is loose, the thread is repaired or replaced, so that the loosening of the adjustment ring can be reduced.
2. Comprehensive inspection before starting
Before the start of the cone crusher, conduct a comprehensive and full inspection of all parts of the equipment. If the adjustment cap is found to be loose, it is necessary to lock the adjustment cap in time.
3. Adjust the size of ore discharge port
Adjust the size of the ore discharge port of the crusher to make it in a normal state, not too large or too small.
4, modify or replace the appropriate thickness of the rolling wall and broken wall.
If the conical broken wall or broken wall is too thick, the adjustment cap will not touch the top of the support sleeve. Therefore, it is necessary to modify or replace the appropriate thickness of the mill wall and the crushing wall, or install a special special adjustment cap washer.
5. Replace the broken locking rod
If the locking rod of the adjusting cap is broken, it is necessary to replace the broken rod in time.
Moretec crusher wearing parts provide you:
Custom configuration ensures consistent production
Durable manganese steel increases the uptime of the crusher
Reduce equipment wear
The abundant inventory of patterns (covering all major brands and models), as well as all patterns produced only according to the original drawings, ensure fast delivery and a perfect match with the crusher.
Based on our more than 15 years of experience in this field, we can adjust it according to special requirements.
Perfect management, covering your entire procurement process: pre-sales (technical consultant, drawing number confirmation, etc.), sales (confirm all necessary information, confirm the order), delivery (clear photos and test reports are ready for customer confirmation), After-sales (after-sales inspection, size matching, service life inspection, etc. after the goods arrive at the work site). Make sure there is no doubt about each purchase)
Abundant production capacity: about 10000 tons per year to ensure the supply capacity to customers.
1) The adjusting ring components include hopper, threaded ring and fixed cone lining plate. Its installation quality can also affect the stability of equipment operation, crushing effect and service life of fixed cone lining plate.
2) The fixed cone liner and the threaded ring contact through the conical surface. During installation, place the normal cone liner, place the threaded ring on it, place the flange on the threaded ring, and clamp the snap ring to the outer ring of the neck of the fixed cone liner. Then tighten the bolts successively, repeatedly and symmetrically, and jack up the flange and clamp the snap ring.
3) After the fixed cone liner is installed, the pressure iron, sealing ring and hopper can be installed.
Solution of 2. Cone Break Adjustment Ring Looseness
1. Repair or replace the thread
When the adjustment sleeve, the support sleeve and the thread of the adjustment sleeve are worn and the adjustment ring is loose, the thread is repaired or replaced, so that the loosening of the adjustment ring can be reduced.
2. Comprehensive inspection before starting
Before the start of the cone crusher, conduct a comprehensive and full inspection of all parts of the equipment. If the adjustment cap is found to be loose, it is necessary to lock the adjustment cap in time.
3. Adjust the size of ore discharge port
Adjust the size of the ore discharge port of the crusher to make it in a normal state, not too large or too small.
4, modify or replace the appropriate thickness of the rolling wall and broken wall.
If the conical broken wall or broken wall is too thick, the adjustment cap will not touch the top of the support sleeve. Therefore, it is necessary to modify or replace the appropriate thickness of the mill wall and the crushing wall, or install a special special adjustment cap washer.
5. Replace the broken locking rod
If the locking rod of the adjusting cap is broken, it is necessary to replace the broken rod in time.
Moretec crusher wearing parts provide you:
Custom configuration ensures consistent production
Durable manganese steel increases the uptime of the crusher
Reduce equipment wear
The abundant inventory of patterns (covering all major brands and models), as well as all patterns produced only according to the original drawings, ensure fast delivery and a perfect match with the crusher.
Based on our more than 15 years of experience in this field, we can adjust it according to special requirements.
Perfect management, covering your entire procurement process: pre-sales (technical consultant, drawing number confirmation, etc.), sales (confirm all necessary information, confirm the order), delivery (clear photos and test reports are ready for customer confirmation), After-sales (after-sales inspection, size matching, service life inspection, etc. after the goods arrive at the work site). Make sure there is no doubt about each purchase)
Abundant production capacity: about 10000 tons per year to ensure the supply capacity to customers.
Parts List
