Product summary:
MORETEC impellers are available in a variety of materials and designs to meet your specific application. MORETEC provide absolutely interchangeable equipment and parts for mineral processing and mining. We use FARO 3D reverse engineering design, wear and corrosion material forming technology to provide our real customers with equipment and parts with longer wear life.

Classification and function of slurry pump impeller: 1. Slurry pump impeller is divided into closed impeller according to mechanical structure: it is composed of blades and front and rear cover plates. The closed impeller has high efficiency and is difficult to manufacture, and is most used in centrifugal pumps. Suitable for conveying clean liquids with low viscosity such as clean water and solutions without particles; Semi-closed impeller: Semi-closed impeller is suitable for conveying materials that are easy to precipitate or slightly contain particles, and its efficiency is lower than that of closed impeller; Open impeller: An impeller with only blades and no complete cover plate is called an open impeller. The open impeller is suitable for conveying materials containing more suspended solids, and its efficiency is low, and the pressure of the conveying liquid is not high. 2. According to its suction method, it can be divided into: single suction structure is simple, and the liquid is only sucked from one side; the double suction structure is more complicated, and the liquid is sucked from both sides, which has a larger suction capacity.

The impeller is the rotor and rotating part of the centrifugal pump. The front and rear shields have pump-out vanes to reduce recirculation and seal contamination. Hard metal and molded elastomer impellers are completely interchangeable. Casting in the impeller thread does not require inserts or nuts. It can also provide high efficiency and high lift design. It increases or decreases the pressure and flow of the fluid. When the slurry pump handles the solid mixture, the most worn component is the impeller.

Slurry pump spare parts, I .e. pump parts, are directly connected to the slurry, which are crucial to the service life of the slurry pump. The fluid receiving components include impellers, linings, throat sleeves, frame plate lining inserts, housings, etc. These components are very easy to wear because they work under the long-term impact of high-speed abrasive and corrosive slurry. For the long service life of pump parts, materials play an important role here.

MORETEC provide a variety of impellers, suitable for any application and use case, made of a variety of materials, including chromium white iron (a variety of metallurgical changes), natural rubber, polyurethane, etc. We also provide expert advice on determining the correct metal composition for your specific application, which is especially important when pumping slurry with extremely high or low pH. Other factors include the running speed of the pump, particle size and hardness-all of which will affect the choice of impeller. Impeller is the core of any pumping application. Achieving efficiency in your process requires proper impeller selection. This cannot be overemphasized, so please contact us directly to discuss your requirements.
When you need them most. Contact MORETEC immediately to find out how quickly we can transport replacement parts from the warehouse to your work site.

Disclaimer:
MORETEC provide complete new pumps and replacement parts (including components), and any use of competitor names, trademarks, models or part numbers is for reference only.

Add Review