Home / Wearing Parts / Pump Wearing parts / Standard Parts / D062XL-10E65 Pump Standard Labyrinth

      D062XL-10E65 Pump Standard Labyrinth

      Manufacturer : MORETEC

      Part number : D062XL-10E65

      OEM Compatibility :

      Description

      Description

      The labyrinth of the pump shaft assembly is mainly used in the horizontal slurry pump. The labyrinth body is in the form of a circular tube. The middle of the outer wall is provided with multiple radial circular rectangular grooves I, the end of the outer wall is provided with circular rectangular grooves II, the outer wall of the circular cone table is provided with axial circular rectangular grooves III. The labyrinth is made of ordinary cast iron. The labyrinth has good sealing effect, excellent rigidity and strength performance, and long service life.

      During the assembly of the bearing components of the horizontal slurry pump, the inner ring of the bearing shall be preheated. The temperature shall not exceed 120 ° C. The inner ring of the bearing must be close to the shaft shoulder and the grease retaining ring. For double row tapered roller bearings, the inner ring, outer ring, locating sleeve, etc. are complete sets of components. During the assembly of bearing, pay attention to adding proper amount of bearing grease. Labyrinth ring and labyrinth are used for sealing at the bearing end cover. When installing the labyrinth ring, pay attention to the relative arrangement of the mouth in the diameter direction.

      MORETEC offers 100% interchangeable new pumps and replacement parts (including assemblies). Any use of other company names, trademarks, model numbers or part numbers is for informational purposes only.
      Parts List

      Parts List

      No accessories information
      People who seen this item also look
      Ratings and Reviews