The cone crusher has less steepness in the crushing cavity, and there are more parallel belts between the crushing areas. The cone crusher uses an abnormally rotating shaft covered with a wear-resistant layer to squeeze the stone to crush it, while the crusher The closed concave bucket is covered with manganese grooves or bowl-shaped lining. When the rock enters the top of the cone, it will be fixed between the covering layer and the bowl-shaped lining or groove and squeezed. Large pieces of ore are crushed once, and then lowered to a lower position to crush again. This process will continue until the fragments are small enough to be discharged through the small mouth at the bottom of the crusher.

Cone crusher wear parts are widely used in mining, metallurgy, construction, chemical and silicate industries to crush hard and medium hardness ores and rocks, such as river pebbles, granite, basalt, iron ore, limestone, quartzite, diabase, iron ore, gold ore, copper ore, etc.

Main materials: high manganese steel, manganese chromium alloy (Mn13, Mn13Cr2, Mn18, Mn18Cr2), hard alloy or customized materials.

Main technology: water glass sand casting and lost foam casting process.

MORETEC has strong technical advantages and rich experience in wear-resistant casting production. Our products have smooth surface, accurate size, high wear resistance and longer life. We can customize according to customer's drawings and requirements, and improve our products according to customer feedback.

Add Review